| Specializing in Vintage & Modern 2 Strokes. Atv's, Atc's, Snowmobiles, & Motorcycles. |
| Custom Ordered Parts will appear here when ready. |
* High Performance Restoration parts.
*Cylinder Porting, & Reconditioning for most 2 Strokes.
( Haven't you heard, about deburred? )
*Chamber filling for Select High Compression Applications are available.
( Worldwide shipping on all Parts & Services.)
Shipping pricing listed is for U.S Mailing Address.
|
|
| Yamaha Instrument Clusters.
Yamaha Exciter Instrument Cluster.
Features : Speedo, Tack, Trip Reset, HighBeam,Water Temp, Oil Level. Lighted for Night Use.
|
|
|
| K&N Air/Fuel Ratio Monitors
Available in Round,or Rectangular Mount Monitors.
Designed to aid the preformance enthusiast for correct jetting.
LED display.
.
|
|
|
|
|
HIGHFLOW Reed Valves Assemblies, and UpGrades for ..VINTAGE & Modern 2 Stroke engines.
* Reed Valve Porting.
* UpGrade Valves, For larger up to date flows.
* Reed Stuffers. {Availible for some models.}
* Carb Boots, And Clamps.
* Valve Gaskets, Intake Gaskets.
|
|
2 Port Reed Valve Porting Service.
|
|
|
|
4 Port Reed Valve Porting Service.
|
|
|
|
6 Port Reed Valve Porting Service.
|
|
|
|
|
|
8 Port Reed Valve Porting Service.
|
|
|
|
Jet Ski Reed Plates Inquire Within.
|
Note : Reed Valve Porting Service Requires your valves to be mailed to the address listed in contact us.
They go through dissasembly, Inspection, Porting, Polish Reed Stops, & adjustment. Reeds may
remain, if in good condition. New Valve Gaskets, and Returned Mailing too your requested Address.
|
USED Factory Yamaha Replacement Reed Valves
2002 / 2010 YZ 80
2005 /2008 YZ 125
94 / 97 YZ 125
Ported Reed Valves available for listed models.
02 / 10 YZ 80
81 / 86 Yz 125
76 / 80 Yz 125
83 / 86 It 200
92 / 95 Wr 200
83 / present RZ 350
87 / present Banshee
74 / 82 Exciter 440
74 / 77 GP 440
New Upgrade High Flow Valve for listed models.
77 / 83 IT 250
77 / 81 IT 465
77 / 81 YZ 465
77 / 85 YZ 250
85 / 86 Tri-Z 250
New large Carb Intakes Available for listed models.
( 36mm- 40mm )
77 / 83 IT 250
MX 360
77 / 81 IT 465
85 / 86 Tri-Z 250
YAMAHA
91/95 WR 200
84/85 DT 200 { TORQUE VALVE }
PORTED, W/ CARBON FIBER REEDS, OR FIBER REEDS.
81/86 YZ 125 THIS VALVE TAKES THE PLACE OF,OR ADDS TO THE TORQUE SPACER.
83/86 IT 200 MOVES THE TIP OF THE VALVE 2.5MM's WITH OUT USE OF A SPACER PLATE.
YAHAMA RZ/BANSHEE
84 / PRESENT MODELS { WHALE VALVE PORTING }
HYFLOW 34MM TO 38MM CARBS
(REQUIRES STOCK REEDS TO BE REPLACED.)
REDUCES REED FLUDDER AT HI RPM'S
|
Twin Cylinder Whale Valve Porting Service.
Yamaha : RZ 350, RD 350, RD 400,
350 Banshee, GP 440, Exciter 440.
For TZ 750's (( Double Click ! ))
Or adjust quanty too 2.
|
|
Note : This Modification requires the use of
(aftermarket) Twin Cyl Torque Reeds.
Listed Below.
|
Twin Cyl. After Market Torque Reeds. ---->
|
|
|
|
Twin. Cylinder ( Aftermarket ) Carbon Fiber Reeds.
|
|
|
|
Expanchion Chamber Oil Lamp Wick Kits.
Made From Retired Climbing Rope,
and Brass Wire.
(2 Styles Available)
2# For Yamaha Banshee Twin Pipes.
1# For Single Pipes,like Honda Cr 500R, Suzuki LT 500R.
(Reused, Recycled, And Reignite the Fire In your old Expanchion Chambers!)
|
 |
| Expanchion Chamber Oil Lamps? |
|
|
|
|
Yamaha V MAX 4 750/800
__Modified...___TZ 750________________
Hyflow Ported Reed Valves, and Intakes.
Compatible for 35mm & 38mm Carbs.
( Machining may be required for the 38mm Carb bodies.)
current used set sold. preorders welcome. Porting service is available.
| |
New Factory Yamaha Reed Valve Kits, Intake Manifolds, Boost Bottles, Clamps.
|
4 New Stock Yamaha Valves, Ported,
w/ Fiber Reeds, & Valve Gaskets.
|
|
4 New Factory Yamaha Torque Valves.
Incorperated 2.5 mm Reed Spacer.
Ported For Hyflow, Polished Reed stops.
New Factory Valve Gaskets,
Hytenchion Fiber Reeds.
[ For: 34mm to 38 mm Carbs ]
|
|
4 New Factory Yamaha Intake Manifolds,
w/ 2 Boost Bottles, 4 Clamps,& 4 Clips.
[ For: Stock / 32mm Carbs ]
|
|
4 New Factory Yamaha Intake Manifolds.
Ported. w/ 2 Boost Bottles, 4 Clips, And 4 Clamps.
[ For 34 mm to 38 mm Carbs.]
|
|
 |
| POLISHED TORQUE VALVE PORTED. |
|
|
 |
| Polished Torque Valve Ported. |
|
|
|
| PORTED TORQUE VALVE POLISHED |
|
|
Factory Yamaha Torque Valve.
2.5 mm Torque Spacer.
Ported For HyFlow.
High Tenchion Fiber Reeds.
Polished Reed Stops.
Compatible with
28mm - 35mm Carbs.
| Factory Yamaha Torque Valve.
2.5 mm Torque Spacer.
Ported For HyFlow.
High Tenchion Fiber Reeds.
Polished Reed Stops.
Compatible with
28mm - 35 mm Carbs.
| Factory Yamaha Torque Valve.
2.5 mm Torque Spacer.
Ported For HyFlow.
High Tenchion Fiber Reeds.
Polished Reed Stops.
Compatible With
28mm - 35mm Carbs.
|
YAMAHA YZ 125
( 1981 - 1993 )
| YAMAHA IT 200
( 1983 - 1986 )
|
YAMAHA WR 200
( 1992 - 1995 )
|
New Factory Yamaha Reed Valve.
Ported For HyFlow.
Polished Reed Stops.
( For: 28mm To 35mm Carbs.)
| Yamaha Blaster 200
( 1988 an Present.)
|
|
Single Cylinder Whale Valve Porting Service.
Yamaha : Blaster 200 \ / Yz 125
(88-Present) (1974-1980 )
It 175 \ / Tri-Moto 175
(1976-82) (1982-1983)
For: 28mm to 38mm Carbs
Note: This Modification requires the use of
(after market Fiber Torque Reeds.)
Single Cylinder:
Aftermarket Fiber Torque Reeds. ---->
|
|
----^--------------------------------------------------
|
|
|
New HyFlow Ported Reed Valve.
Great Vintage Upgrade.
{ For: 28MM to 35MM Carbs.}
| Yamaha Tri Moto 175
( 1982 / 85 )
|
|
New HyFlow Ported Reed Valve.
Great Vintage Upgrade
{ For: 28MM to 35MM Carbs }
| Yamaha IT 175
( 1978 - 1982 )
|
|
New HyFlow Ported Reed Valve.
Great Vintage Upgrade.
( For 28MM to 35MM Carbs )
| Yamaha YZ 125
(1974 / 1980 )
|
|
Yamaha: Exciter 440, GP 440. 433 sc.
{ 1974 / 1982 }
FACTORY YAMAHA HYFLOW REED VALVES.
Ported for Hyflow. Factory Fiber Reeds,
Polished Reed Stops, ( lightweight ).
w/ 4 New Factory Valve Gaskets.
( For 28mm to 35mm Carbs.)
| Upgrade For Yamaha TZ 750.
Requires the Purchase Of 2 Kits.
|
OR Double ((Click!))
|
|
|
|
| Yamaha GP 440, Exciter 440.
( 1974-1982 )
Improved Performance!
2 use Reed Valve Assemblies,
Ported for Improved Flow.
In good condition.
|
|
|
Yamaha: Phazer 480,
{ 1984 / 1994 }
Factory Yamaha Reed Valves.
Ported For HYFLOW.Factory Fiber Reeds,
Polished Reed Stops,Factory Gaskets.
( For Stock Carbs,To 40MM Carbs.)
|
|
|
|
Yamaha Rd 350, and Rd 400.
( 1974-1979)
New Factory Yamaha Valves
Whale Valve Design. Factory Fiber Reeds.
Ported For HyFlow. Polished Reed Stops
Incorperated rubber Valve Gasket.
Drop In and go. No cylinder Modes Necessary.
Manifold Too Valve Gasket or Sealer is suggested.
| Compatible with stock carbs, 29mm, 30mm, 32mm Carbs.
|
For Modified HyFlow Rd 350's, Rd 400, and early model LC 350's Seek Info under
RZ 350 / Banshee
|
|
|
 |
| Matched Flowed Reed Valves. |
|
|
 |
| Rd 350/400 |
|
|
 |
| Upgrade Valves |
|
|
YAMAHA RD 350 - RD 400
One set of used Upgrade Reed Valves, Match ported for Improved Even Flow through the valves, Whale Fin Design, one peice Yamaha Fiber Reed peddals. polished reed stops, and Adjustment. this style does not require valve gaskets, O`ring style seal Molded into the valve body. Seal in very good condition. very little hours of use.
|
|
Yamaha DT1, DT2, DT3
( Torque Induction 250 )
1967-1973
|
|
|
|
Yamaha DT 250, DT3, DT2, DT1, 250cc MX-ENDURO.
YAMAHA RT 360, RT1, RT2, RT3, 360cc MX-ENDURO.
IGNITION CONTACT POINTS.
MITSUBISHI IGNITION.
|
|
|
MITSUBISHI IGNITION CONDENCER.
|
|
|
large Carb Intake, Fits:
1976 & Present IT 250, IT 465, IT 490.
1976 - 1984 YZ 250, YZ 465, YZ 490
1985-1986 Tri-Z 250
MX 360.
may fit other models not listed.
Factory Yamaha Part.
|
this is the side view mounted on the tm 36mm,
straight mount for carb,boost port, oil injection port.
volume stuffing design.
measurements hole to hole.
across the top, 72 mm
from top to bottom, 53 mm
42 mm carb mount.
18 mm boost port mount.
oil injection 3 mm.
|
|
|
|
Honda
Atc 250R, Trx 250R, & Cr's.
|
Honda : ATC 250R, TRX 250R.
CR 250R- Hyflow Intake & Ported Reed Valve Assembly. NEW
Compatable with :38mm ,39mm,and 40mm Carbs.
Larger 4 Peddel Design,Helps Reduces Reed Fludder,in Hi RPM Applications.
Note: Intake Moves the Carb Forward 1 inch, and angled
to the left,for clearance. if stock airbox boot is used,
a extenchion caller and compression ring is required.
Or the use a Angled Uni or K&N Style Clamp on Filter Pod.
| |
|
|
85/86 ATC 250R - 86/89 TRX 250R.
Factory High Compression Head Gasket.
|
|
Suzuki
RM's, LT 250R QuadRacer, & LT 500R QuadRacer .
|
UpGrades 4 Suzuki QuadRacer 500R 1987.
Reed Valve options.
(AfterMarket) Torque Fiber Reeds.
(Aftermarket) Carbon Fiber Reeds.
|
|
|
|
Upgrades 4 Suzuki QuadRacer 500R 88/92.
Reed Valve Options.
( Aftermarket ) Torque Fiber Reeds.
( Aftermarket ) Carbon Fiber Reeds.
|
|
|
|
|
|
Upgrades 4 Suzuki RM 250......
|
|
|
|
|
|
Upgrades 4 Suzuki RM 125.
*87/88 Ported HyFlow Reed Valve Assembly.
|
|
New: Porting, & Polished Reed Stops.
( Factory Carbon Fiber Reeds, & Stops.)
|
Vintage Performance Upgrade...----->
|
Kawasaki
Tecate - 4 Tecate - 3 & KX's
|
Upgrades 4 Kawsaki 250 Tecate 4.
( 87/88 ) models. (Aftermarket.) Torque Fiber Reeds.
|
|
|
|
( Aftermarket ) Carbon Fiber Reeds.
|
|
|
|
Upgrades 4 Kawasaki 250 Tecote 3.
( 1985-87.)
|
|
|
|
Upgrade 4 Kawasaki KX 500.
(Aftermarket) Torque Fiber Reeds.
(Aftermarket) Carbon Fiber Reeds.
|
|
|
|
|
|
Upgrades 4 Kawasaki KX 250.
|
|
|
|
|
|
Upgrades 4 Kawasaki KX 125.
|
|
|
|
|
|
Yamaha Boost Bottles.
( Enegery Induction Systems.)
__________________________________
For Select Yamaha Models Listed Below.
83-92 RZ 350 YPVS MODELS
79-82 LC 350
74-79 RD 350 / RD 400 *
(* w/ Conversion to RZ reedvalves, and boots.)
87-06 Banshee
VK 540, SRV 540, PHAZER 480,
V MAX TWINS, V MAX 4 750 / 800
| |
MIKUNI Carburetor Upgrades, for High Performance,
2 Cycle Restorations.
|
MIKUNI 34 mm TMX Carbs.
* Twin Carb Assy, for select twin cylinders.
*Choke Cables, and Activator, for individual choke assy.
*Brass oil injection ports, {may also be used for Nitrous oxide injection Ports.}
*Floatbowls W/ Water & Dirt Traps.
*Power Jets Available upon request.
(* A must for NOS Injection.)
|
|
Upgrade for : John Deere Liquifire 440 . {1977-1983}
|
YAMAHA BANSHEE 350, RZ 350, TZ 's, & RD 350/400.
2000 & Present 34 MM TMX's w/ Oil Injection Ports ,
UNI 2 Stage Pod Filters, Choke Cables w/ dash,or plastic mounting flipper.
|
88-06 Yamaha Blaster 35 mm Carb Assembly
Mikuni 35MM TMX Carburator, Custom Fit Intake,
Ported Reed Valve, UNI 2 Stage Filter pod...
|
35 mm Mikuni Tmx Blaster Upgrade.
1/ New Custom 35mm Intake.
1/ New 35 MM Mikuni TMX Carburator.
1/ New Factory Reed Valve Ported.
1/ New Uni 2 Stage Filter Pod.
2/ New Valve Gasket Seats.
Vent Hoses, And Fuel Line.
|
|
|
|
Mikuni 35mm TM Racing Flat Slide Carb.
| |
|
| Mikuni 38mm TM Racing Series.
|
|
|
Mikuni TM PRO SERIES.
39mm & 41MM Flat Slide Carburators
|
|
|
|
Mikuni TM Flat Slide Carburators.
24mm, 28mm, 32mm, 34mm, 36mm, 38mm.
|
|
|
|
Mikuni TM Flat Slide
w/Accelerator Pump.
( Pumper Carbs.)
Available in
33MM, 36MM, 40MM.
|
|
|
|
|
| MIkuni VM Round Slide Carburators.
16mm, 18mm, 20mm, 22mm, 26mm, 30mm,
32mm, 34mm, 36mm, 38mm, 44mm.
|
|
|
|
|
| FlyWheel, & Magneto Assemblies, Breakerless CDI Ignitors, Coils. etc. |
1977 Yamaha GP 440 Flywheel / Magneto assembly.
Part # 8A0-81300-20-00
Cond: Used.
Very low hours.
( Flywheel Assembly.)
Casting # FOTOO571
*Magnets in very nice condition,
*very little rust, and corrosion marks,
*no major signs of wear.
*Key way slot in perfect cond.
*Threads, and screws, are all like new.
* Center Riveting , Tight
|
|
( Points Magneto Assembly.)
CASTING # FOTOO575
Cond: Used.
In very good condition.
Points Breakers,looks as though
they have been adjusted in the Ignitor.
light wear marks on screws.
Condensers looks good.
Charging Coils (1.2.3.) in very nice condition.
( no signs of insulation cracking.)
Inside wireing harness
Mounting Base Plate very good cond.
wire conectors , in good condition.
Photos on the way.
|
Wanted 1969 Ford 351 Windsor 4 Valve Heads.(4V) casting.
|
WHERE YOU PREPARED FOR Y2K ?
1 DECADE AGO IN REMBERMANCE.
|
|
